Filter
Top Products
Warranty Statement 2 Service & Adjustments 10
Safety Rules 2 Storage 10
Identification of Symbols 2 Parts List 11
Assembly 6
Operation 7 Spanish 12
Maintenance 9 Parts and Ordering Back Cover
FULL ONE YEAR WARRANTY ON CRAFTSMAN _;LAWN EDGER ATTACHMENT
When used and maintained according to the operator's manual, if this product fails due
to a defect in material or workmanship within one year from the date of purchase, return
it to any Sears store, Sears Service Center, or other Craftsman outlet in the United States
for free repair (or replacement if repair proves impossible).
This warranty excludes expendable parts that can wear out from normal use in less
than one year.
This warranty applies for only 30 days from purchase date ifthis product is used for
commercial or rental purposes.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
DANGER! This lawn edger
can be dangerous! Careless or
improper use can cause
serious or even fatal injury.
Read and understand the
operator's manual before
using the lawn edger.
Always wear appropriate ear protection, eye protection and head protection.
_WARNING: When using garden-
ing appliances, basic safety precau-
tions must always be followed to re-
duce the risk of fire and serious injury.
Read and follow all instructions.
This power unit can be dangerous!
Operator is responsible for following
instructions and warnings on unit and
in manual. Read entire operator's
manual before using unit! Be thor-
oughly familiar with the controls and
the proper use of the unit. Restrict the
use of this unit to persons who have
read, understand and will follow the
instructions and warnings on the unit
and in the manual. Never allow chil-
dren to operate this unit=
AFETY INFORMATION
THE UNIT
OPERATOR SAFETY
_,DANGER: RISK OF OUT.
KEEP HANDS AND FEET AWAY
FROM BLADE AND CUTTING AREA.
Do not attempt to clear away cut ma-
terial or hold material to be cut when
the blade is in motion. Make sure
powerhead is stopped and spark plug
wire is disconnected (or powerhead is
disconnected from power source)
when removing jammed material from
the cutting blade. Do not grab or hold
attachment by the cutting blade.
2