Filter
Top Products
KNOWYOURSAW
READTHISOPERATOR'SMANUALANDSAFETYRULESBEFOREOPERAT-
ING YOUR CHAIN SAW, Compare the illustrations with your unit to familiarize
yourself withthe location of the various controls and adjustments. Save this
manual for future reference.
rToo, " Hand Guard.---_ A_._. Handle
k S .or.ope
"NL .1
t I.,I I_ /_._ switch
Chain Muffler _ . Pdmer
Bar Oil Fill Cap Housing Fuel Mix FillCap
Cylinder Cover
Fast Idle
Adjusting Chain
Screw Direction
of Travel
Throttle Choke } Bar Clamp Nuts Guide Bar
Tdgger Knob Bar Clamp Chain
Catcher
ON/STOP SWITCH
The ON/STOP Switch is used to stop
the engine.
THROTTLE TRIGGER
The throttle trigger controls engine
speed.
THROTTLE LOCKOUT
The throttle lockout must be pressed
before you can squeeze the throttle trig-
ger.This feature prevents you from ac-
cidentally squeezing the trigger.
FAST IDLE LOCK
The fast idle lock holds the throttle trig-
ger in the starting position, Activate the
fast idle lockby pressing the throttle
lockout and squeezing the throttle trig-
ger. With the throttle trigger squeezed,
press the fast idle lock. Release the
throttle lockout and trigger while holding
the fast idle lock button.
CHOKE KNOB
The Choke Knob activates the choke to
provide additional fuel to the engine
during cold starting.
PRIMER BULB
The Primer Bulbcirculates fuel to the
carburetorto providequicker starting,
CHAIN TENSION
It is normal for a new chain to stretch
during first 30 minutes of operation. You
should check your chain tension fre-
quently. See Chain Tension under the
Service and Adjustments section.
6