Filter
Top Products
18
SERVICE & ADJUSTMENTS
SHARPENING OR REPLACING
CHIPPER BLADE
NOTE: When tipping the unit, empty the oil and fuel tank and keep
engine spark plug side up.
1. Disconnect and ground the spark plug wire to retaining post.
2. Remove hose assembly and bag assembly.
3. Remove the three hex cap screws holding the hose hanger bracket
and chipper chute to the upper housing. See Figure 22.
4. Remove the front hubcaps, flange lock nuts, front wheels, and wave
washers that attach to the pivot arm assemblies. See Figure 23.
5. Remove the shoulder screws, thrust washers, and bell washers
that go through the pivot arms to the front support brace. The front
support brace and lock nut can be removed at this time as well.
6. Remove the four screws on the upper housing that secure the
nozzle cover. See Figure 24.
Figure 22
#HIPPER
#HUTE
(EX#AP
3CREWS
Figure 23
&RONT3UPPORT"RACEAND,OCK.UT
0IVOT!RM!SSEMBLY
"ELL7ASHER
4HRUST7ASHER
7AVE
7ASHER
7HEEL
,OCK.UT
(UB#AP
3HOULDER3CREW
Figure 24
.OZZLE3CREWS