Filter
Top Products
12 DR
®
10 HP CHIPPER
•
WEAR EYE PROTECTION WHEN CUTTING THE BANDING. THE BANDING MAY HAVE A LOT OF
TENSION ON IT AND MAY SNAP AND CUT YOU. ALWAYS STAND TO ONE SIDE WHEN CUTTING
THE BAND.
• STABILIZE THE SHIPPING CONTAINER ON CLEAN FLAT TERRAIN BEFORE ATTEMPTING TO UNPACK
AND ASSEMBLE THE MACHINE.
1. Pry off the crate and cut any bands holding the machine to the pallet.
Be careful when cutting the banding.
2. Remove the Parts Box, containing the Chipper Hopper, assembly hardware, manuals etc. from the
shipping container.
3. With the help of another person, carefully lift the machine from the shipping pallet, resting it on its
wheels and support leg.
4. Compare the contents of the shipping carton and the Parts Box with the Parts Supplied list on the
previous page. If any of the parts are missing, contact 1-800-DR-OWNER (376-9637). Do not
discard your packaging material until you are fully satisfied with your new DR 10 HP CHIPPER.