Filter
Top Products
21
22
OTHER OPTIONS
13 1/2"
[343mm]
1 1/8"
[29mm]
VANDAL RESISTANT SOLUTIONS
In applications where vandalism is a concern, a typical solution is to mount the luminaires out of reach. Mounting at elevated heights predictably
results in lower light levels. To address vandalism Envoy has inherent, robust design features and various options to help prevent damage and
unauthorized access.
TAMPER RESISTANT [TR]
This option features tamper resistant
stainless steel hardware for lens, lens
latches and fixture slide release mechanism.
Head type T20 Torx
TM
center-pin reject type
fasteners are provided. Vandal resistant
screwdriver is available [separately as an
accessory].
Task light locations are specified by zones,
A1-A4. Up to four [4] task lights are possible
depending on specific configurations of the
luminaire
[see ordering information and footnotes].
LUMINAIRE DESIGN
Envoy’s lens section ranges in thickness from minimum 0.125" in optical area to 0.250" in latch
and fastening area for a robust design. A polycarbonate upper and lower lens option is available
for additional impact strength.
A1
45°45°
7.56"
[192mm]
A2
A4
A3
TASK LIGHT [TL] APPLICATIONS
For complex lighting needs that require adjustability and flexibility, consider how the task light option can best offer solutions. This option features an
MR16 lamp source available in 120v and 12v lamp types with a wide variety of beam patterns. Task lights can be used to bring visual attention to
dedicated pathways that enter and exit the garage. Areas of high congestion may also benefit through use of multiple task lights when negotiation
between vehicles and pedestrians is prominent. Illuminating stairwells, signage, parking appliances and pay booths for general and emergency lighting
needs demonstrates the true and complete functionality of the task light feature.