Filter
Top Products
19
20
CONSTRUCTION
Low copper, one-piece aluminum die-cast
electrical housing features heavy cast walls
designed for effective heat dissipation and
resistance to corrosion. Toolless release
aluminum die-cast latches securely hold
lens in place and aid in efficient installation
and maintenance. A tamper resistant option
is available to prevent unauthorized access.
Envoy is IP66 rated, promoting long term
optical efficiency while allowing for fast
efficient cleaning by power washing. All
gaskets contained within Envoy are silicone
material including lens gasket and housing
wire grommet.
OPTICAL
Lens: Lens employs a 2 part system [upper
and lower] by which the reflector is
accurately located and securely locked in
place. Injection molded, virgin Acrylic
material is standard due to its ability to
resist radiation from UV and for its superior
clarity [polycarbonate is available]. Lens is
attached via two [2] toolless die-cast
latches. When released, lens will hinge off
housing and remain captive on one side to
allow for easy, obstruction free lamp
placement or electrical access. Lens
perimeter is completely sealed at housing
junction using a one-piece extruded,
vulcanized silicone gasket. Reflectors:
Envoy reflectors use premium materials and
a durable finish process to ensure longevity
of optical performance. The 3-part reflector
system employs a bright specular Alzak
®
anodized aluminum hydro-formed main
reflector, a diffuse anodized aluminum
hydro-formed upper reflector and die-
formed premium 95% reflective, specular
pre-anodized sheet aluminum inserts.
A choice of three [3] different optical
distributions with a variety of light
controlling media may be used to optimize
lighting performance.
ELECTRICAL
Electrical components are hard mounted to
electrical housing for optimal heat
dissipation. HID units use medium-base
4KV pulse rated sockets with standard
magnetic, high power factor ballasts
[minimum starting -30°C/-22°F MH-MP, -
40°C/-40°F HPS]. Compact Fluorescent [CF]
units use 4-pin lamp sockets with standard
high power factor electronic ballast
[minimum starting -18°C/0°F]. Induction
lamp features a high frequency, high power
factor generator [available in 100-120V or
200-277V, minimum starting -25°C/-13°F]
The electrical reflector cover is keyed and
accessed via two [2] toolless thumbscrews.
MOUNTING
Standard fixture mounts to a square or
octagonal 4" surface or recessed mounted
j-box via electro-zinc plated, heavy-gauge
“quick mount release” bracket system,
complete with stainless steel hanger which
allows for “hands-free” wiring connection.
“Quick Mount System” enables efficient
fixture mounting, wiring connection
inspection and fixture removal. Quick
mount plate features stainless steel springs
that help absorb vibration. A variety of
other mounting options and accessories
including free swinging balanced Pendant
Box/Bird Guard [PBG], Trunnion Mount [TM]
and Wall Mount [WM] arm are available.
EGRESS OPTIONS
Envoy offers multiple egress lamp sources
including quartz halogen, compact
fluorescent and MR16 quartz halogen,
available in multiple circuit options.
Compact fluorescent battery packs are
available integral within fixture or remote
mount in various wattage configurations.
FINISH
Housing is finished in 5 stage premium
TGIC polyester powder coat paint, 2.5 mil
nominal thickness for superior protection
against fade and wear. Envoy is supplied
standard in grey and is available in black,
white and bronze. RAL and custom color
matches available.
PATENTS PENDING
SPECIFICATION FEATURES
Lens Reflector
Toolless Latch