Cooper Lighting MSRU180W Landscape Lighting User Manual


 
2
Congratulations. You have purchased a Regent motion-activated sensor
retrofit unit with adapter. This unit will convert a standard floodlight or lantern
into a motion-activated security light, providing safety and convenience for
your home and family.
How it works
Add the motion sensor to your existing unit quickly
and easily. The light senses heat images from
objects such as people, large animals, and automo-
bile engines. When motion is detected, the light will
automatically turn on. Once motion has stopped, the
light will turn off after a preselected time delay. Your
motion activated light may also be used as a standard floodlight or lantern if
the existing light you are adding the sensor and adapter to is
wired to a switch.
What you need
• Phillips head screwdriver
What’s included
Motion sensor with mounting piece (A)
• Adapter with coiled cord connector (B)
• (2) Mounting screws (C)
Applications
What to know
• UL LISTED for wet locations.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Under Part 15 of the FCC
Rules, any changes or modifications to the motion detector described in this
instruction sheet that are not expressly approved by Cooper Lighting could
void the user’s authority to operate the equipment. NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to
M S RU 1 8 0 W
C M S RU 1 8 0 W
70 feet
180 degrees
A
C
B
Lantern
Twin
Floodlight
Single Floodlight
MSRU180W spreads 300-1052 8/12/05 10:52 AM Page 2