Filter
Top Products
SKU 65588 For technical questions, please call 1-800-444-3353. Page 12
Figure 5
Air Cleaner Cover
2. Remove the Air Filter Element. See
Figure 5.
Cleaning:3.
a.
Wash the element in warm water
and mild detergent several times.
Rinse. Squeeze out excess water
and allow it to dry completely. Soak
squeeze out the excess oil.
b.
before use.
Spark Plug Maintenance
Remove Spark Plug Access Cover 1.
(17). Disconnect spark plug wire
from end of plug. Clean out debris
from around spark plug and remove
the spark plug.
Inspect the spark plug: 2.
If the electrode is oily, clean it using a
clean, dry rag.
If the electrode has deposits on it,
polish it using emery paper.
If the white insulator is cracked or
chipped, the spark plug needs to be
replaced.
When installing a new spark plug, ad-3.
Do not pry against the electrode or
the insulator, the spark plug can be
damaged.
Install the new spark plug or the 4.
cleaned spark plug into the engine.
Gasket-style: Finger-tighten until the
gasket contacts the cylinder head,
then about 1/2-2/3 turn more.
Non-gasket-style: Finger-tighten until
the plug contacts the head, then
about 1/16 turn more.
Apply dielectric spark plug boot 5.
protector (not included) to the end of
the spark plug and reattach the wire
securely.