Filter
Top Products
5. When you are finished using the Generator, stop the motor driver, then disconnect the
appliances.
Maintenance
WARNING: Before performing any maintenance on the Generator, the motor driver must
be off, and the Generator must be allowed to cool down after use.
1. Clean the Generator with compressed air. Do not blow directly into the heat vents. Do
not immerse in water. Use a damp cloth do wipe clean.
Never insert rags, tools, or any device into the Generator openings.
2. Periodically operate the Generator.
3. Store in a clean and dry location.
4. Check and tighten belts when they become loose.
5. Check and tighten pulley set screws.
SKU 45416 Page 8 REV 02/02; 04/02; 09/03
120 Volt
Duplex
Outlet
Over Current
Reset Buttons
120 / 240 Volt
Twistlock Outlet