Filter
Top Products
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
5. Do not force tool. It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool
capacity.
6. Use the right tool for the job. Do not attempt to force a small tool or attachment to do
the work of a larger industrial tool. There are certain applications for which this tool
was designed. Do not modify this tool and do not use this tool for a purpose for which it
was not intended.
7. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
SKU 45416 Page 2 REV 04/02; 09/03; 12/03
THIS GENERATOR IS NOT INTENDED TO POWER SENSITIVE ELECTRONIC
EQUIPMENT WITHOUT THE ADDITION OF AN APPROPRIATE LINE CONDITIONER (SOLD SEPARATELY).
Specifications
ITEM DESCRIPTION
Power Output 10,000 watts (maximum), 7200 watts continuous (rated); 60 Hz
Voltage Output
2 - 120 VAC (20 amp), single phase duplex receptacle;
1 - 120 / 240 VAC (30 amp), single phase twistlock receptacle
Motor Driver Requirements 3600 RPM, 16 HP
Drive Type Belt driven
Drive Shaft
1 inch (dia.) meter; length: 2-3/8 inches;
Keyway: 1/4 (W) x 2 (L) inches
Generator operation 2-pole, revolving field, brushless excitation