Filter
Top Products
Page 2SKU 02810 For technical questions, please call 1-800-444-3353.
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions,
assembly, operating, inspection, maintenance and cleaning
procedures, parts list and assembly diagram. Keep your invoice
with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for
future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas
invite injuries.
2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.
3. STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment, and
keep out of reach of children.
4. DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
5. USE EYE AND HEARING PROTECTION. Wear ANSI approved safety impact
eye goggles, full face shield and ANSI approved hearing protection (plugs or
muffs) during use. ANSI approved safety impact eye goggles and hearing protec-
tion are available from Harbor Freight Tools.
Item Description
Electrical Requirements 2 HP / 120 V / 60 Hz / 13.2 Peak Amps,
7.8 No Load Amps / 1600 Watt
Cutter Bar Size 16”
Brake Stop Electromagnetic Stop Within .15 Sec. After Shutoff
Chain Type #91VG “Oregon
®
Chain”
Oiler System Automatic
Chain Guide Rail
Dimensions
16-1/8” Long x 2-1/2” Wide x 5/32” Thick
Weight 11 Pounds