Filter
Top Products
Mini 4 Bar™ 2.0 User Manual (Rev. 03) Page 9 of 18
4. OPERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the
display. Please refer to the Product Overview (page 5) to see the buttons location on the
control panel.
Button Function
<MENU>
Press to find an operation mode or to back out of the current menu
option
<DOWN>
Press to scroll down the list of options or to find a higher value
<UP>
Press to scroll up the list of options or to find a lower value
Menu Map
Mode Programming Steps Description
DMX Mode 512
A 1~d512
Puts the fixture in DMX operating mode
and selects the DMX starting address
Sound Active SND
-
Triggers the sound active program to the
music, using the internal microphone
Automatic AUTO
S 1~100
Selects one of the built in programs
Adjusts the speed of the automatic
program
Configuration
(DMX)
Set this product in DMX mode to control it with a DMX controller.
1. Connect this product to a suitable power outlet.
2. Turn this product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX
input socket of this product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you
could restrict the access to some of the product’s channels.
The Mini 4 Bar™ 2.0 uses up to 15 DMX channels in its 15-channel DMX mode, which
defines the highest configurable address to 498.
If you are not familiar with the DMX protocol, you may refer to the DMX Primer section in
the Technical Information chapter.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 512 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.