Filter
Top Products
Mini 4 Bar™ 2.0 User Manual (Rev. 03) Page 11 of 18
Footswitch
Operation
The included footswitch provides quick access to the preset colors, color change
programs, and triggering via the onboard microphone on the Mini 4 Bar™ 2.0. Please
see the chart, along with the set of instructions below for further explanation.
1. Power on the fixture.
2. Connect the footswitch to the Mini 4 Bar™ 2.0 via the 4-pin connection cable
with plug.
3. Press pedal #1 (Preset) to activate control. When this is operating properly, the
LEDs on the Mini 4 Bar™ 2.0 will light white (first function on pedal #1).
Pedal Sub-option Function
1
(Preset)
1 x press White
2 x press Red
3 x press Green
4 x press Blue
5 x press Yellow
6 x press Magenta
7 x press Cyan
8 x press
Color change every second in a
continuous loop
9 x press
Color change every three seconds in a
continuous loop
2
(Sound On)
-
Sound controlled
There is no need to modify any settings for the Mini 4 Bar™ 2.0 before connecting
the footswitch. It will operate properly in any mode.
Plug the master fixture in LAST!
Disconnecting
the Footswitch
In order to properly disconnect the footswitch, please follow these steps:
1. Unplug the footswitch from the Mini 4 Bar™ 2.0.
2. Turn the power to the fixture off (unplug the power cable)..
3. Turn the power to the fixture on again (plug in the power cable), and the fixture
will properly operate on any one of the 3 modes..