Filter
Top Products
Page 8 of 18 Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Mounting
Before mounting this product, read and follow the safety recommendations indicated in
the Safety Notes section (page 2 of this manual).
Orientation
The Mini 4 Bar™ 2.0 may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
Rigging
This product has multiple rigging options. They are as follows:
Floor Standing (using the two mounting/standing brackets)
Hanging (using the two mounting/standing brackets)
Hanging (using the two hanging clamp Mounting points)
Before deciding on a location for this product, always make sure that it will be easy to
access the unit for maintenance and programming purposes.
Make sure that the structure onto which you are mounting this product can support its
weight. Please see the Technical Specifications section of this manual for weight
information.
When mounting this product overhead, always use a safety cable. Mount the product
securely to a rigging point, whether an elevated platform or a truss. The bracket has a
13 mm hole, which is appropriate for this purpose.
When rigging this product onto a truss, you should use a mounting clamp of appropriate
weight capacity.
When power linking multiple products, you must always consider the length of the power
linking cable and mount the products close enough for the cable to reach.
MountingDiagram
Tripodstand
adjustmentknob
Podtilt
adjustment(x8)
Podpan
adjustment(x4)