Filter
Top Products
Page 14 of 21 Impulse™ 648 User Manual Rev. 6
5. TECHNICAL INFORMATION
Product
Maintenance
Dust build up reduces light output performance and can cause overheating. This can
lead to reduction of the light source’s life.
To maintain optimum performance and
minimize wear, you should clean your lighting products at least twice a month. However,
be aware that usage and environmental conditions could be contributing factors to
increase the cleaning frequency.
To clean the product, follow the instructions below:
· Unplug the product from power.
· Wait until the product is at room temperature.
· Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
· Clean all glass/transparent surfaces with a mild soap solution, ammonia-free glass
cleaner, or isopropyl alcohol.
· Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
· Softly drag any dirt or grime to the outside of the glass/transparent surface.
· Gently polish the glass/transparent surfaces until they are free of haze and lint.
Always dry the glass/transparent surfaces carefully after cleaning them.