Filter
Top Products
Legend™ 550 Spot User Manual 15 1/11/2010 11:36 AM
Hanging Clamp
Note!
Clamp is sold separately.
Mounting
Orientation
This fixture may be mounted in a vertical position. This can be a hanging or a sitting position,
provided there is adequate room for ventilation.
Note! It is not recommended to mount this fixture at any other odd angle, other than standard
hanging or sitting position. Failure to comply with this may cause damage not
covered under
the warranty.
Rigging
It is important never to obstruct the fan or vents pathway. Mount the fixture
using, a suitable “O” type clamp. Adjust the angle of the fixture by
loosening both knobs and tilting the fixture. After finding the desired
position, retighten both knobs.
· When selecting installation location, take into consideration lamp
replacement access and routine maintenance.
· Safety cables must always be used.
· Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature
changes or restricted ventilation.