Filter
Top Products
7
A) Attach the included accessories. Loosen the
thumb screws on the side of the visual back
and remove the protective plastic cap. Insert
the star diagonal and eyepiece into the barrel of
the visual back and tighten down all thumb
screws. B) Twist and remove the front lens
cover from the end of the telescope. C) Attach
the Star Pointer and turn it on by rotating the
dial on the side. (For more information on
attaching the accessories, see the Assembly
section of manual
)
.
1
2
4
3
Remove the battery cover in the center of the
base by gently lifting up on the round
portion of the cover. Insert 8 AA batteries
(user supplied) into the battery compartment
of the base. Replace the cover.
Battery Compartment
Turn on the power to the NexStar by turning
the switch located at the bottom portion of
the fork arm, to the "On" position.
On/Off Switch
StarPointer
Findersco
p
e
Eyepiece
Star
Diagonal
Visual Back
Remove the NexStar from its packaging and
attach the base to the tripod. Remove the
accessories from their individual boxes. Rotate
the optical tube so that you can access the
battery compartment.