Filter
Top Products
8
Step 2c. Trim excess motor wires to six inches and
attach the fan wires to the ceiling bracket wiring by
placing the bare end of the wires side by side and
then securing with a wire nut. Test that the connection
is secure by pulling on the wire nut. Connect in this
order:
GROUND conductor of power source. Secure with
wire nut as shown in Figure #4.
conductor wire from the power source. Secure with
wire nut as shown in Figure #4.
from the power source. Secure with wire nut as
shown in Figure #4.
3 GREEN GROUND
WIRES
2 WHITE
WIRES
2 BLACK
WIRES
(Figure #4)
(Figure #5)
Step 2d. After making the wire connections, the wires
should be tucked in to the body of the fan as shown
in Figure #5. The wires should be spread apart, with
the three grounded conductor wires being placed on
one side of the fan body and the power conductor
wires being placed onto the other side of the fan body
separating the connections.
FAN MOUNTING
SCREWS
Step 2e. Locate the two fan mounting screws located
on the ceiling mounting plate. Loosen both screws
halfway as shown in Figure #6.
(Figure #6)