Filter
Top Products
6
faN INSTallaTION
CEILING HARDWARE (not to scale)
CEIlINg MOUNTINg PlaTE INSTallaTION
Ceiling Mounting Plate
CAUTION:
To reduce the risk of personal injury, use
only the mounting hardware provided
with the approved outlet box to install the
crossbar mounting plate.
Note:
box to ensure that it is supported by a joist or beam
across its upper surface. If not, a 2 x 4 stud must be
installed.
Step 1a. Carefully feed the ceiling wires through
the center hole of the ceiling mounting plate. Attach
the plate, as shown with ground wire down, to the
Ensure that the outlet box wires are not pinched by
the washers or between the mounting plate and the
ceiling.
.
JOIST
CEILING
WIRING
CEILING
MOUNTING
PLATE
GREEN
GROUND WIRE
WASHERS
Outlet Box
Screws
CEILING FAN
APPROVED
WIRING BOX
Screw Pack A:
1
1
/
2
" x 8-32" Roundhead Screws (2)
and Washers (2)
Screw Pack A:
1½" Wood Screws (2) and Washers (2)
Phillips
Screwdriver
Screw Pack A:
Wire Nuts (3)
Screw Pack A:
3" Wood Screws (2)
Sashers (2)