Casablanca Fan Company C3U72M Outdoor Ceiling Fan User Manual


 
2
CIRCUIT BREAKER
Trip the breaker for
the circuit you will
be working on
FUSE BOX
Remove the fuse for
the circuit you will
be working on
SAFE USE
Inspect the contents of your carton for possible shipping
or handling damage and report any such damage directly
to your authorized Casablanca dealer.
It is always a good idea to have an assistant to help with
the installation.
e blades in each pack are matched for equal weight
to assure smooth fan operation. If more than one fan is
being installed, be careful not to mix blades from diff erent
cartons.
Never install a fan over a pool or spa.
For safety reasons, the fan blades must be a minimum of
7 feet above the fl oor.
In any installation, the tips of the blades must be at least 18
inches from the wall in order to provide suffi cient clearance
for the blades.
Never insert anything into the path of the fan blades while
the fan is in operation.
When cleaning, painting, or working near your fan, be
very careful of the fan and blades. Always turn the power
OFF to the ceiling fan before servicing it, working on it,
or replacing lightbulbs.
Never operate a fan that has been damaged in any way.
For assistance in obtaining service, call Casablanca Fan
Company toll-free at 1-888-335-5247 or contact your
local Casablanca Authorized Dealer.
BEFORE YOU START
CAUTION: Risk of electrical shock!
All wiring must be in accordance with the National Electric Codes and the appropriate
local electrical codes.  e National Codes require proper grounding as a precaution against electrical shock. A qualifi ed
electrician should be consulted if you are unsure.
is fan is designed to be installed on an existing electrical outlet box.  e outlet box must be UL Listed for ceiling fan
installations, if it is not, a new box must be installed. Casablanca extension poles are available for sloped or high ceiling
installations.
is ceiling fan requires a grounded electrical supply of 120 VAC, 60 Hz and a minimum 15 amp circuit.  e maximum
current requirement for the fan with light fi xture is 3.8 amps.  e fan uses about 1 amp or 100 watts. Maximum light
current is 2.8 amps or 340 watts of lighting.
Where wire nuts are employed, be sure all bare wires are within the connectors. When installing the canopy hatch, make
sure all wires are within the canopy and that no wires are being pinched.
Unpacking
Before assembling and installing your ceiling fan, remove all parts from the shipping cartons and check them against the parts
listed in the Parts List. Before discarding packaging material, be certain that all parts have been removed.
NOTE: For best performance and for your warranty to be valid, use only genuine Casablanca Fan Company blades, light
xtures, and accessories.
INTRODUCTION
18
ʺ
84
ʺ