7
Mo d e n a
®
II
INSTALLATION HALOGEN BULB AND GLASS
Step13.Screw the 100 Watt Halogen bulb into the
socket. If it is touched, or dirty, clean carefully with
a tissue. A dirty glass bulb will cause the bulb to fail
almost immediately.
Step14.
the glass shade so that they line up with the tabs on the
Step15.Carefully lift the glass shade up inside the
Step16.Rotate the shade in a clockwise direction
until it is held tightly in place by the three tabs.
CAUTION!
be clean.
CAUTION!Improper installation of glass may
cause it to be damaged or it to fall and break.
NOTE:
Regulations, this ceiling fan contains a device
or improper operation.