Casablanca Fan Company 6688Z Outdoor Ceiling Fan User Manual


 
9
Panama®
Step 5. To hang the fan body in the
canopy, hold the fan body rmly and
insert the ball into the canopy open-
ing. Check that no wires were pinched.
Rotate the fan body until the slot in the
nylon ball ts into the pin opposite the
canopy opening.
NOTE: Independent control of the
light xture using a W-81 accessory
control requires an additional pow-
er wire run from the wall switch to
the fan. See Page 12 for wiring.
CAPPED
BLUE
D1OPTION
WIRE ON
3SPEED ONLY
FOR LIGHT
CONTROL
PINSLOT
BALL
CANOPY
HATCH
CANOPY LOCK WASHER 5
CANOPY SCREW 5
Step 4. Attach the canopy to the crossbar mounting bracket with three of
the 8-32 x 2
1
/
2
” long canopy screws and lock washers provided with your
Casablanca fan. Hand tighten until snug against the ceiling.
CANOPY
SCREW
CANOPY
LOCK
WASHER
FEED OUTLET BOX
WIRES THROUGH
CANOPY OPENING
Note: On sloped ceilings, align the
canopy opening toward the top or
peak of the room.
CANOPY HARDWARE
HANGING THE FAN
CANOPY INSTALLATION
CANOPY