Filter
Top Products
11
Panama®
PROCEED TO YOUR FAN’S CONTROL FEATURE SECTION FOR INSTALLATION/OPERATING INSTRUCTIONS:
BLADE/BLADE HOLDER INSTALLATION
Step 10. Attach the blades to the blade
holders with the three blade screws and
at washers provided for each blade.
Hand tighten securely.
Install the assembled blade and blade
holder to the fan motor.
Hand tighten securely.
Repete for each blade assembly.
BLADE SCREW
3 PER BLADE
FLAT WASHER
3 PER BLADE
BLADE HOLDER SCREW
2 PER BLADE HOLDER
Your fan is equipped with a ywheel
that allows for both 4 and 5 blade
installation. The screw holes sur-
rounded by squares are for 4 blade
installation, while the screw holes in
circles are for 5 blade installation as
shown above.
WARNING: To reduce the risk of personal injury, do not bend blade holders
when installing, balancing, or cleaning. Do not insert foreign objects between
rotating fan blades.