13
Panama®
R
by the W-81 wall control.
OFF by the W-81 and the intensity
adjusted from low to high.
two independent 120V AC supply
wires.
the HIGH speed setting.
(4) dierent speed settings.
dierent speed settings.
HIGH speed setting.
are required.
the W-41 wall control.
CAUTION! Failure to set the pull-chain
speed to HIGH can result in faulty
operation of the fan and damage to
the W-41 wall control. To conrm fan
is set to HIGH: Turn W-41 fan speed
switch to ‘HI’ - set fastest fan speed
with pull chain.
CAUTION! Failure to set the pull-
chain speed to HIGH can result in
faulty operation of the fan and
damage to the W-81 wall control.
To confirm fan is set to HIGH:
Turn W-81 fan speed switch to
‘HI’ - set fastest fan speed with
pull chain.
4SPEED