Casablanca Fan Company 6645Z Outdoor Ceiling Fan User Manual


  Open as PDF
of 22
 
10
Step 6a. Attach the fan wires to the ceiling xture outlet
box wiring by twisting the bare ends of the wires together
and then securing with a wire nut. Test that the connection
is secure by pulling on the wire nut. Connect in this order:
Step 6b. W-85 Wiring Connections
 
conductor of power source. Secure with wire nut.
 
xture outlet box. Secure with wire nut.
 -
ing outlet box. Secure with wire nut.
Step 6c. Pull Chain Connections
 
conductor of power source. Secure with wire nut.
 
xture outlet box. Secure with wire nut.
 
ceiling outlet box and the BLUE wire form light kit. Secure
with wire nut.
 
outlet box. Secure with wire nut.
2 WHITE WIRES
2 BLACK
WIRE NUT
PULL CHAIN
CONNECTIONS
3 GREEN WIRES
3 GREEN WIRES
2 WHITE WIRES
2 BLACK + 1 BLUE
W85 CONNECTIONS
Step 7. Tuck the wires into the canopy
with the wire nuts pointed upwards, so
that the WHITE and BLACK wires are on
opposite sides of the canopy and all wires
are clear of the canopy opening.
Step 8. Install canopy hatch with the
last canopy screw and lock washer. To
do this, tilt the fan body away from the
hatch opening.
Tighten the screws rmly by hand only,
TILT THE
FAN TO
INSTALL
LAST
CANOPY
SCREW
CANOPY
HATCH
CANOPY
SCREW
LOCK
WASHER
Step 9. Straighten the fan, then check
to ensure that there is no movement be-
tween the canopy and ceiling or Hang-Tru
ball and top support shaft.
CANOPY HATCH INSTALLATION
CANOPY ELECTRICAL CONNECTIONS
If you will be installing an accessory light kit, also connect
the BLUE light power wire from fan to the BLACK wires).
 previous next