Filter
Top Products
9
VER RAZANO
™
INSTALL LIGHT KIT BASE
Step 14. Route the motor wires through the center of the
light kit base. Align the light kit base onto the switch
housing using the tabs of the switch housing.
Using the three switch housing screws removed in Step 13,
attach the light kit base to the switch housing.
LIGHT KIT PARTS
LIGHT KIT
SCREWS
REMOVE SWITCH HOUSING SCREWS
Step 13. Remove the three screws from the switch
housing and set aside for use in Step 14.
SWITCH
HOUSING
SCREWS
SWITCH
HOUSING
TABS
SWITCH
HOUSING
TABS
SWITCH HOUSING
SCREWS
(FROM STEP 14)
LIGHT KIT BASE
LIGHT KIT
BULB PLATE