Filter
Top Products
8
COMPLETING INSTALLATION
Step 14. If your fan is a Versa•Touch 2
model, please skip to Step 15.
For 3-Speed models, hold the switch hous-
ing up to the fan and connect the motor
plug to the switch housing socket. The
connector is keyed to ensure correct in-
stallation.
PREPARATION
(3-SPEED ONLY) CONNECTING THE SWITCH HOUSING ASSEMBLY
Step 13. Locate the switch housing/cap
assembly and remove the two 8-32 X
3
/8″
screws holding the cap onto the switch
housing.
SWITCH HOUSING
MOUNT SCREW
(REMOVED IN STEP 8)
5-32 X
9
/32″
(2)
SWITCH
HOUSING
CONNECTOR
(SOCKET)
MOTOR
CONNECTOR
(PLUG)
3-SPEED
SWITCH HOUSING
AND CAP ASSEMBLY
CAP SCREW
8-32 X
3
/8″
(2)
Note: Save these two screws–they
will be used in Step 19!
Note: Do not force the connectors–
check that they are orientated so
the keying will match!
CAPISTRANO
™
VERSA•TOUCH 2
SWITCH HOUSING
AND CAP ASSEMBLY
Casablanca
CAP
SWITCH
HOUSING
SWITCH HOUSING
CONNECTOR
(3-SPEED ONLY)
CAP SCREW
8-32 X
3
/8″
(2)
3-SPEED
VERSA•TOUCH 2
INSTALL SWITCH HOUSING MOUNTING SCREWS
Step 15. Install the two (2) 5-32 X
9
⁄32″
screws removed in Step 8, leaving ap-
proximately
1
⁄8“ of the threads exposed
for installation of the switch housing.
3-SPEED
VERSA•TOUCH 2