Filter
Top Products
11
3-SPEED ♦ W-80 WALL CONTROL OF THE FAN & LIGHT(S)
3-SPEED ♦ W-40 WALL CONTROL OF THE FAN
•The fan may be turned ON and OFF
by the W-80 wall control.
•The lights may be turned ON and
OFF by the W-80 and the inten-
sity adjusted from low to high.
•The fan must be supplied with two
independent 120V AC supply
wires.
• Set the FAN pull chain switch to
the HIGH speed setting.
•Turn the lights ON at the fan.
•The W-80 allows the choice of four
(4) different speed settings.
•The W-40 allows the choice of four
(4) different speed settings.
•No light fixture is used.
• Set the FAN pull chain switch to the
HIGH speed setting.
•No changes in household or fan wiring
are required.
•The fan may be turned ON and OFF by
the W-40 wall control.
CAUTION! Failure to set the pull-chain
speed to HIGH can result in faulty
operation of the fan and damage to
the W-40 wall control. To confirm fan
is set to HIGH: Turn W-40 fan speed
switch to 'HI' - set fastest fan speed
with pull chain.
CAUTION! Failure to set the pull-
chain speed to HIGH can result in
faulty operation of the fan and
damage to the W-80 wall control.
To confirm fan is set to HIGH: Turn
W-80 fan speed switch to 'HI' -
set fastest fan speed with pull
chain.
R