Filter
Top Products
Quick Connect Nozzles
Adjustable Fan Nozzle
General-purpose nozzle. Cleans wide
surfaces like siding, decks and fences.
Spray pattern can vary from 0° high
impact to 60° wide fan by twisting the
nozzle. Adjust pressure from high to
low by extending nozzle 1/2".
Note: Nozzle must be at minimum
pressure to suction detergent. To select
detergent, turn selector knob on front
of unit to either “I” or “II.”
Turbo Nozzle
Excellent for deep
cleaning tough surfaces
such as stained concrete
or siding. Combines the
power of a narrow, high-impact stream
with the efficiency of a 25° fan pattern.
Due to their increased cleaning power,
these nozzles can cause damage to
vehicles, woodwork, paint, loose
cement, and other soft materials. Use
with caution.
HOW TO AVOID
DAMAGING SURFACES
Directions for Use
Damage to cleaning surfaces occurs
because the impact force of the water
exceeds the durability of the surface.
You can vary the impact force by
controlling the nozzle’s fan pattern, the
nozzle’s angle to the cleaning surface,
and the nozzle’s distance from the
cleaning surface. Never use a narrow
high impact stream or a turbo nozzle on
a surface that is susceptible to damage.
Avoid spraying windows with a narrow
high impact stream or turbo nozzle.
Doing so may break the window. The
surest way to avoid damaging surfaces is
to follow these steps:
1. Before triggering the gun, adjust
the nozzle to a wide fan pattern.
2. Place the nozzle approximately
4-5 feet away from the cleaning
surface. Then hold the nozzle at a
45° angle to the cleaning surface.
Trigger the gun.
3. Vary the fan pattern spray angle
and the distance to the cleaning
surface until optimum cleaning
efficiency is achieved without
damaging the surface.
NOZZLE CLEANING
INSTRUCTIONS
A clogged or partially clogged nozzle
can cause a significant reduction of
water coming out of the nozzle and
cause the unit to pulsate while
spraying.
6
www.chpower.com
Operating Instructions and Parts Manual