Filter
Top Products
www.chpower.com
8
Operation
1. The lance is affected by pressure
during operation; therefore hold it
firmly with both hands and point
the nozzle toward the ground.
2. Activate by pulling the trigger of the
gun/spray handle.
3. Adjust the distance to the cleaning
surface, which will also adjust your
pressure of the nozzle.
4. Spray pattern shape and intensity
can be changed by twisting the
spray adjuster at the end of the
lance. Keep hands clear of the front
of the lance to prevent injury. See
Figure 9.
END OF OPERATION
1. Press the ON/OFF switch to “OFF” on
the pressure washer.
2. Disconnect the plug from the power
source.
3. Shut off the water supply.
4. Activate the spray handle to relieve
the machine of pressure.
5. Lock the trigger into the “OFF”
position.
6. Remove high pressure hose from
unit after each use.
TIP: It is best to remove all hoses when
storing unit for long periods of time.
Operating Instructions and Parts List PW1350
Figure 9 - Spray Adjust
Notes