Filter
Top Products
7
A) RF (RADIO FREQUENCY) RECEPTION STATUS
This icon shows the connection status between the Receiver unit and the USB Transmitter.
There are three basic status indications:
The Receiver is successfully synchronized to the USB Transmitter and
receiving weather data from it periodically.
A flashing icon indicates that the Receiver is searching for the RF signal
from the USB Transmitter.
No vertical bars indicates that the RF signal from the USB Transmitter is
not being received or is too weak.
B) AUTO-SYNCHRONIZED CLOCK
The clock on the main unit is synchronized to the Internet automatically and is adjusted for
optimal accuracy. Press UNITS on the back of the Receiver until you see “Hour Format Setting”
and use the + / - buttons to select 12 or 24 Hr time format.
NOTE: If your PC is not connected to the Internet for a long period of time, the clock display
may not be accurate. Once you reconnect to the Internet, exit and then relaunch the Golf FXi
software, then click “Send to Receiver”.
C) ALARM ON INDICATOR
Icon appears confirming the alarm has been turned on by pressing ALARM.
A
B
C
D
F
N
G
E
H
I K L
M
J
RECEIVER DISPLAY GUIDE