Filter
Top Products
MAINTENANCE
2545 01/11 Maintenance Section 5-4
© 2011 Alamo Group Inc.
MAINTENANCE
Lubrication Schedule
Before operating your Loader, take the time to inspect and repair any damage to the machine or tractor. Only a
minimum of time and effort is required to regularly maintain this machine to provide long life and trouble free
operation.
Lubricate all grease fittings: one at each end of lift boom arms and one at rod and base ends of each lift and
bucket cylinders.
NOTE: Fully retract bucket to a comfortable height to grease bucket/loader boom joint. Do not reach or stand
under a raised loader or attachment without proper support.
Adjusting Bucket Level Indicator
With various tractor tire options or attachments, it
may be necessary to adjust bucket level indicator
tube up or down on bucket cylinder tube. Tractor
must be on level surface with attachment flat on
surface. Loosen u-bolt hex nuts and adjust level
guide tube along bucket cylinder until end of guide
tube is flush wtih end of rod. Tighten u-bolt hex
nuts.