Filter
Top Products
OPERATION
2387 01/11 Operation Section 4-3
© 2011 Alamo Group Inc.
OPERATION
1. Standard Equipment and Specifications
Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader
equipped with a 48” bucket, external hydraulic system of 8 GPM with engine operating at 2500 RPM and relief
setting of 2400 PSI.
Horsepower Range 30-45 HP
System pressure/flow rate 2400 PSI/ 8 GPM
Lift Capacity to maximum height 1360 lbs.
Breakout force at pivot pin 4920 lbs.
Rollback force at ground line 2340 lbs.
Total weight with bucket (approx.) 1014 lbs.
Raising time to full height 5.5 seconds
Lower time 3.59 seconds
Attachment dump time 2.06 seconds
Attachment rollback time 2.25 seconds
Hydraulic system flow 8 GPM
System pressure at rated flow 2400 PSI
(A) Maximum Lift Height at Pivot Pin 10
6”
(B)
Maximum Height Under Bucket
101"
(C) Clearance with Bucket Dumped 86”
(D) Reach at Maximum Height 24”
(E) Maximum Dump Angle 44°
(F) Reach with Attachment on Ground 62”
(G) Attachment Rollback Angle 17°
(H) Digging Depth 5.5”
(I) Overall Height in Carry Position 54” @ top of upright
(Manufacturers estimated specifications and design subject to change without notice.)