Filter
Top Products
45 Series Rotary Tiller
14
FIELD OPERATION
Buhler Farm King 45 Series Rotary Tillers are designed with the inherent flexibility of
operating well in almost any kind of soil and terrain conditions. However, the operator
has the responsibility of being familiar with all operating and safety procedures and
following them.
Each operator should review this section of the manual at the start of the season and as
often as required to be familiar with the machine. When using, follow this procedure:
1. Review and follow the pre-operation Checklist. Review Safety Instructions.
2. Attach the tractor to the machine. See Attaching/Unhooking Section.
3. Before going to the field review Transporting Section.
4. Pull into the field and position the machine in a level area.
5. Lower into working position.
6. Set the machine:
a. Level the frame:
Use the screw jack on the right lift arm to level the frame from side-to-side.
b. Depth: Use the Depth Gauge Shoes on each side to set the operating
depth. Position the Depth Gauge Shoes in the top hole for shallow tilling
and in the bottom hole for deep tilling.
ALERT: In soft soil conditions, the skid plates become less effective and
sink into the ground. Use the turnbuckle on the top link to set the frame
angle so the bottom of the Depth Gauge Shoes are level when operating.
c. Offset:
The Category Pin Brackets can be moved 3 to 4 inches along the Deck
Assembly to either side of center if required. Center the machine for
normal operation. Offset if the tire tracks are wider than the machine or
when tilling around trees, bushes or other areas.
d. Drag Shield:
Adjust the chain in the Adjustment Bracket to set the height of the Drag
Shield. Set the Drag Shield to just contact the tilled soil when operating.