Filter
Top Products
45 Series Rotary Tiller
17
TRANSPORTING
When transporting the machine, review and follow these instructions:
1. Be sure all bystanders are clear of the machine.
2. Be sure that the machine is securely attached to the tractor and all retainer pins
are installed.
3. Clean the SMV emblem, lights and reflectors and be sure they are working.
4. Be sure you are in compliance with all applicable lighting and marking regulations
when transporting. Check with your local authorities.
5. Be sure your machine can clearly be seen by overtaking and oncoming traffic.
6. Keep to the right and yield the right-of-way to allow faster traffic to pass. Drive
on the road shoulder if permitted by law.
7. Do not allow riders.
8. Always use hazard flashers on the tractor when transporting unless prohibited by
law.
9. Use pilot vehicles front and rear when transporting during times of limited
visibility.
10. Never transport the machine faster than 20 mph (32 km/h). The ratio of the
tractor weight to the Tiller weight plays an important role in defining acceptable
travel speed. Table 2 summarizes the recommended travel speed to weight
ratio.
Table 2 Speed vs. weight Ratio
Weight of fully equipped
or loaded implement(s)
relative to weight of
Road Speed towing machine
Up to 32 km/h 1 to 1, or less
(20 mph)
Up to 16 km/h 2 to 1, or less
(10 mph)
Do not tow More than 2 to 1