Filter
Top Products
L-1914 Rev. B 8.
Figure 3.
ATTACH HOSE
TO WAND
3a. With pliers clamp one end of
the 3/8 inch x 12 foot hose (14)
to the Hand Wand (10) using
one Hose Clamp (15), as
shown.
Figure 4.
ASSEMBLE HOSE
SWIVEL NUTS
4a. Insert a Hose Barb (23) through the
threaded side of each Hose Swivel Nut (24),
as shown.
4b. Insert one Vinyl Washer (11) against the
back side of the Hose Barb (23) to insure
that the fittings do not leak.
4c. Screw the assembled Swivel Nuts (24) to
both Dual Tee Valve (9) fittings located on
the Pump Assembly (4), as shown.
14
15
24
11
23
15
Hose Clamp
Qty. 1
10
10
15
14
24
4
9
ASSEMBLY