16
D
GB
Messer/Messerbalken/
Antriebsriemen/Pflegewalze/
Messerwalze/ Untermesser/
Schneidplatte/Schneidfaden/
Schneidkopfdeckel/Sägeblatt/
Nickel-Cadmium-Zelle (Batterie).
Diese Hersteller-Garantie berührt
die gegenüber dem Händler/
Verkäufer bestehende Gewähr-
leistungsansprüche nicht.
Please read these operating instruc-
tions carefully and observe the
notes they contain as well as the
accompanying notes on safety.
Use these operating instructions to
familiarise yourself with how to
operate and control your lawn-
mower, its proper use, and the
notes on safety.
A
Warning! Never allow
children or other people
who are not familiar with these
operating instructions to use this
unit.
Local laws may specify a minimum
age for users of this type of
gardening equipment.
Never mow your lawn if other
people, especially children and pets
are nearby. Remember that the
user or operator is responsible for
all accidents that occur involving
other people or their property.
Keep these operating instructions
in a safe place.
4. Notes on these Operating Instructions
The Brill lawnmower is intended
for cutting lawns and areas of
grass in domestic gardens and
allotments and not for commercial
use in public areas, parks, sports
stadia, on streets and in agri-
culture and forestry.
Adherence to the instructions for
use enclosed by Brill is a pre-
condition for the proper use of
the equipment. The instructions for
use also include the operating,
care and maintenance instructions.
A
Warning! The mower must
not be used for trimming
bushes, hedges and herbaceous
plants, for cutting and chopping
weeds or for mowing lawns on
rooftops or in balcony boxes
because of the risk of physical
injury. Moreover, the machine may
not be used as a shredder for cut-
ting up tree and hedge trimmings
or for rolling out uneven areas of
ground.
Only use approved extension cords
made of PVC (code H05 VV-F)
or rubber (code H05 RN-F) with
a maximum length of 15 m.
5. Proper Use
Checking all the Parts are Included:
The box contains the following
parts:
.
Complete lawnmower
.
Grass catcher
.
Operating instructions
.
Service centre directory
Fitting the Guide Handle
Remove the appliance from the
packaging, release the guide bars
with the retaining bar (fig. A1
Pos. 16), fold the guide bars
(fig. A2) back, engage the guide
bar at the required height (six
height settings are possible, fig. B)
and firmly screw it together with
the left and right tension handles
(fig. A pos. 1).
A
Warning! Ensure that
the cable is not squeezed
(fig. A pos. 8).
Environmental protection, disposal
(pursuant to RL 2002/96 EC)
The packaging material is
made ao recyclable mate-
rials. Dispose of packag-
ing materials in accordance with
regulations. Electrical appliances
are not to be disposed of in the
normal household waste, they must
be professionally disposed of.
Important for Germany:
electrical appliances are to be
disposed of through your local
disposal sites.
6. Assembly
Always carry out a visual inspec-
tion before using your lawnmower
to ensure that cutting tool, retain-
ing bolts and entire cutting unit are
not worn or damaged. Always
replace worn or damaged cutting
7. Putting into operation