Filter
Top Products
52
Maintenance Instructions ADJUSTMENTS
Steering Lever Adjustment
Neutral Position Adjustment - Step 3
1. With the Forward Speed Control (FSC) in neu-
tral, the lever should be straight up. Adjust by
loosening the jam nuts on the FSC Rod and turn
the rod to attain the straight up position. Tighten
the jam nuts.
FSC Position
Steering Adjustment
2. The initial adjustment for neutral is to loosen the
jam nuts on each end of the Hydro-Gear Control
Rods and turn the rods to achieve a measure-
ment of 4-7/8" between the jam nuts. Be sure to
tighten jam nuts before making the measure-
ment.
Actuator Rod Length Adjustment
Locknut
(Position)
Adjustment
Slide
Locknut
(Pivot Point)
4-7/8"