Filter
Top Products
2800 PSI Pressure Washer
12
How to Use the Hose Reel
Your pressure washer is equipped with a hose reel designed
to store the hose when unit is not in use. See “Prepare Unit
for Storage” for long term storage of more than 30 days.
After each use:
1. Disconnect hose from spray gun and high pressure
outlet on pump.
2. Drain water from hose.
3. Slide one end of hose into hole on hose reel.Turn hose
reel with handle to coil hose onto reel (Figure 15).
IMPORTANT: DO NOT use your pressure washer with
the hose coiled onto the hose reel.The hose reel is for
storage purposes only.
Automatic Cool Down System
(Thermal Relief)
If you run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the spray gun,
circulating water in the pump can reach temperatures
above 125°F.The system engages to cool the pump by
discharging the warm water onto the ground.
Figure 15 — Install Hose on Hose Reel