Replacing Control Valves Series 200209 – 450000 LP Gas 404121 3
®
For assistance call 1.800.762.1142.
Replacing Control Valves Series 200209 – 450000 LP Gas 404121 4
®
For assistance call 1.800.762.1142.
Step 6
Remove emitter screen:
A. 200209, 200308, 200605 – remove the 4 screws using a Phillips screw driver that attach the emitter to the emitter bottom, with the
screws removed, remove the emitter.
B. 230000-235000, 450000 – you will need to use the ratchet with an extension along with the 9/16” socket and remove the nut and
washer in the bottom of the emitter. There are 3 bolts that attach the emitter to the emitter bottom Using the #8mm open end
wrench remove these bolts. Remove the emitter screen being careful not to loosen the spacer ring from the burner stud. You will
need this later. (On the 235000-45000 you may want to remove the medium and small domes but it is not necessary).
C. 233000-235020 – there are 3 bolts that hold the emitter to the emitter bottom. Using an #8mm
open end wrench remove these 3 bolts and remove the emitter.