Filter
Top Products
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other) and will
require the use of a polarized extension cord. The appliance plug will fit into a polarized extension cord only one
way. If the plug does not fit fully into the extension cord, reverse the plug. If the plug still does not fit, obtain a correct
polarized extension cord. A polarized extension cord will require the use of a polarized wall outlet. The plug will fit
into the polarized wall outlet only one way. If the plug does not fit fully into the wall outlet, reverse the plug. If the plug
still does not fit, contact a qualified electrician to install the proper wall outlet. Do not change the equipment plug,
extension cord receptacle, or extension cord plug in any way.
SAFETY WARNINGS AND INSTRUCTIONS: DOUBLE INSULATION
Double insulated tools are constructed throughout with two separate layers of electrical insulation or a
double thickness of insulation between you and the toolʼs electrical system. Tools built with double insulation
are not intended to be grounded. As a result, your tool is equipped with a two prong plug which permits you
to use extension cords without concern for maintaining a ground connection.
Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system
is for added protection against injury resulting from a possible electrical insulation failure within the tool.
REPLACEMENT PARTS: When servicing use only identical replacement parts. Repair or replace damaged cords.
FOR ALL APPLIANCES
1) Avoid Dangerous Environment – Donʼt use appliances in damp or wet locations.
2) Donʼt Use in Rain .
3) Keep Children Away – All visitors should be kept at a distance from work area.
4) Dress Properly – Do not wear loose clothing or jewelry. They can be caught in moving parts. Use of rubber gloves
and substantial footwear is recommended when working outdoors. Wear protective hair covering to contain long hair.
5) Use Safety Glasses – Always use face or dust mask if operation is dusty.
6) Use Right Appliance – Do not use appliance for any job except that for which it is intended.
7) Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for
the gardening appliance. Receptacles are available having built-in GFCI protection and may be used for this
measure of safety.
8) To reduce the risk of electric shock, use only with an extension cord intended for outdoor use, such as an
extension cord of cord type SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJOW-A, SJTW-A or SJTOW-A.
9) Extension Cord – Make sure your extension cord is in good condition. When using an extension cord, be sure to
use one heavy enough to carry the current your product will draw. An undersized extension cord will cause a drop
in line voltage resulting in loss of power and overheating.
The table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the
next heavier gauge. The smaller the gauge number, the heavier the cord.
10) Avoid Unintentional Starting – Donʼt carry plugged-in appliance with finger on switch. Be sure switch is off when
plugging in.
11) Donʼt Abuse Cord – Never carry appliance by cord or yank it to disconnect from receptacle. Keep cord from heat,
oil, and sharp edges.
12) Donʼt grasp the exposed cutting blades or cutting edges when picking up or holding the appliance.
13) Donʼt Force Appliance – It will do the job better and with less likelihood of a risk of injury at the rate for which it
was designed.
14) Donʼt Overreach – Keep proper footing and balance at all times.
15) Stay Alert – Watch what you are doing. Use common sense. Do not operate appliance when you are tired.
16) Disconnect Appliance – Disconnect the appliance from the power supply when not in use, before servicing, when
changing accessories such as blades, and the like.
17) Store Idle Appliances Indoors – When not in use, appliances should be stored indoors in dry, and high or
locked-up place – out of reach of children.
18) Maintain Appliance With Care – Keep cutting edge sharp and clean for best performance and to reduce the risk of
injury. Follow instructions for lubricating and changing accessories. Inspect appliance cord periodically, and if dam
aged, have it repaired by an authorized service facility. Inspect extension cords periodically and replace if damaged.
Keep handles dry, clean and free from oil and grease.
19) Check Damaged Parts – Before further use of the appliance, a guard or other part that is damaged should be
carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its op
eration. A guard or other part that is damaged should be properly repaired or replaced by an authorized service
center unless indicated elsewhere in this manual.
Minimum Gauge for Cord Sets
Volts Total Length of Cord in Feet
120V 0-25 26-50 51-100 101-150
(0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)
240V 0-50 51-100 101-200 201-300
(0-15,2m) (15,2-30,4m) (30,4-60,9m) (60,9-91,4m)
Ampere Rating
More Not more American Wire Gauge
Than Than
0 - 6 18 16 16 14
6 - 10 18 16 14 12
10 - 12 16 16 14 12
12 - 16 14 12 Not Recommended
4