Black & Decker NPT318 Trimmer User Manual


 
9
BLADE COASTS AFTER TURN OFF.
DO NOT USE UNDER WET CONDITIONS.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment should be performed by authorized
service centers or other qualified service organizations, always using
identical replacement parts.
Accessories
WARNING: DO NOT use the Pole Trimmer with any type of
accessory or attachment. Such usage might be hazardous.
Maintenance
The cutting blades are made from high quality, hardened steel and with
normal usage, they will not require resharpening. However, if you
accidentally hit a wire fence, stones, glass or other hard objects, you
may put a nick in the blade. There is no need to remove this nick as
long as it does not interfere with the movement of the blade. If it does
interfere, remove the battery from the unit and use a fine toothed file or
sharpening stone to remove the nick.
If you drop the trimmer, carefully inspect it for damage. If the blade is
bent, housing cracked, or if you see any other condition that may affect
the trimmerʼs operation contact your local Black & Decker Service
Center for repairs before putting it back into use.
Fertilizers and other garden chemicals contain agents which greatly
accelerate the corrosion of metals. Do not store the tool on or adjacent
to fertilizers or chemicals.
With the battery removed, use only mild soap and a damp cloth to
clean the tool. Never let any liquid get inside the tool; never immerse
any part of the tool into a liquid.
Troubleshooting Section
If your Pole Trimmer does not operate correctly check the following:
Problem
Possible Cause Possible Solution
Tool will not
start.
Battery will not
charge.
Battery not
installed properly.
Battery not
charged.
Lock-out button not
actuated.
Pole connections
not properly
tightened.
Battery not
inserted into
charger.
Check battery installation.
Check battery charging
requirements.
Pull back on lock
button/actuate trigger.
Refer to instruction manual
for pole connections.
Insert battery into charger
until green LED appears.
Charge up to 9 hours if
battery totally drained.