Filter
Top Products
5
object. Kickback can lead to dangerous loss of control of the chain saw.
WARNING: The following features are included on your
Alligator Lopper
TM
to help reduce the hazard of kickback;
however such features will not totally eliminate this dangerous
reaction. As a chain saw user do not rely only on safety devices.
You must follow all safety precautions, instructions, and
maintenance in this manual to help avoid kickback and other forces
which can result in serious injury.
- This has been designed specifically to cover the tip of the
chain bar where the danger zone for kickback occurs. In the event of
any kickback the guard also helps reduce the risk of the chain coming
into contact with the operator.
- This has been designed with a small
radius tip which reduces the size of the kickback zone on the bar tip.
- Designed with a contoured depth gauge
and guard link which deflect kickback force and allows wood to
gradually ride into the cutter.
This tool and charger is double insulated; therefore no grounding
wire is required. Always check that the power supply corresponds to
the voltage on the rating plate.
WARNING:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry
products, and
• arsenic and chromium from chemically-treated lumber. (CCA)
Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to
filter out microscopic particles.
•
Allowing dust to get into your mouth, eyes, or lay on the skin
may promote absorption of harmful chemicals.
WARNING:
Always use NIOSH/OSHA approved respiratory
protection appropriate for the dust exposure. Direct particles away
from face and body.
CAUTION: Wear appropriate personal hearing protection
during use. Under some conditions and duration of use, noise
from this product may contribute to hearing loss.
The label on your tool may include the following symbols.
The symbols and their definitions are as follows:
V ......................volts A ...................... amperes
Hz ....................hertz W ..................... watts
min ................... minutes
or AC ........alternating current
or DC ...... direct current
n
o ....................no load speed
.................... Class I Construction .................... earthing terminal
(grounded)
.................. safety alert symbol
.................... Class II Construction .../min or rpm...revolutions or
(double insulated) reciprocation per minute
...............Read instruction manual before use
....................Use proper respiratory protection
.................... Use proper eye protection
....................Use proper hearing protection