Filter
Top Products
Part No 440271 Form No F070809A
11
FORCE BLOWER Self-propelled Owner’s Manual
ADJUSTING AIR DIRECTOR
To adjust air direction, squeeze Aim-N-Shoot
TM
control lever. When you want to blow debris at the same angle for an
extended period, choose a suitable position and use the finger controlled push button lock to lock the cone in position.
For operations that do not require the use of the Aim-N-Shoot
TM
feature the manual adjustment knob, pictured below, can
be used to permanently lock the cone into position.
CAUTION: Be sure to release the knob when returning to using
the Aim-N-Shoot
TM
.
DO NOT position director cone to where it will blow debris towards people, vehicles or other objects in vicinity. Flying
debris may damage, harm, or cause injury to people or objects in air flow range.
FRONT DIVERTER POSITIONING (F9 and F13 models
only)
The removable front diverter adapter can be slipped inside the cone to direct the air stream forward. First turn off
engine, and then simply collapse and fold in the larger opening of the diverter and slide inside the cone and allow it to
expand. Then position to the desired angle by rotating the diverter. This option is extremely useful for cleaning out long
cracks in pavement or for cleaning under bushes, building overhangs or along curbs.
WARNING: Unit will be more difficult to control due to the air exiting the unit. Keep hands on the unit at all times when
using the front diverter.
Manual Adjustment
knob
Front diverter
Squeeze and
fold
here