Filter
Top Products
Step 4: Cover the other end of the hose (with
the hose connector) tightly with your
hand. Move to the skimmer and
connect the hose end to the fitting
combination selected in Step 1. Now
you are ready to insert the end of the
assembly into the suction port of the
skimmer.
Step 2: To prevent losing prime to your pool
pump, all air must be removed from the
hoses and the Zodiac 1500
™
head
before connecting them to your system.
Hold one end of the hose over the
return inlet until a full stream of water
flows from the other end.
Step 3: Keep both hose ends underwater and
completely submerge the Zodiac
1500 head. When the bubbles have
stopped flowing from the head,
connect the female end of the hose to
the Zodiac 1500.
7
IMPORTANT
Your hose is now free of air. Please ensure that the hose ends
are kept under water while performing the following steps.
This will prevent air from entering your system.
Your assembly is now complete – enjoy!