ASSEMBLY
Step 1: Slide the disc over the base of the
footpad. Be sure it fits properly in the
grooves provided. Be sure to install the
disc with “TOP” printed facing up.
Step 2: Slide the wheel deflector onto the
female end of the hose. The female end
will eventually attach to the Zodiac
1500 head.
Step 4: Place the hose protector sleeve over the
male end of the hose. Place the hose
connector on the male end of the hose.
Step 3: HOSE ASSEMBLY
Assemble enough hose sections to reach
the farthest point in the pool from the
skimmer,
plus one extra hose section.
HOSE
CONNECTOR
HOSE
PROTECTOR NET
FLOWKEEPER™
VA LVE
MALE END
OF HOSE
SKIMMER
FLOWKEEPER™ VALVE
The pool pump provides more gallon per minute flow than your Zodiac 1500
™
requires. That's why we provide a way to regulate the flow. The FlowKeeper Valve is
self adjusting and provides a by-pass, so that the pool pump and the Zodiac 1500 run
properly. The FlowKeeper Valve MUST BE
used.
Skimming action is maintained through a bypass throat in the valve. As the filter
collects debris, the valve automatically maintains the correct flow to the cleaner. The
FlowKeeper valve comes preset at the two (2) setting. The lower the number, the
lower the flow to the cleaner head. Should readjustment become necessary, pull the
adjustment handle to raise or lower the setting. There are three total setting options.
To adjust
setting, pull and
move to desired
setting.
5
FOR POOLS WITH RETURN INLET
DIRECTIONAL FITTINGS
Replace the directional eyeball
with Zodiac retrofit eyeball return
line diverter and reinstall eyeball
retaining ring.
Part #W90153 for 1
1
/
2
" return lines
Part #W90155 for 2" return lines
IF UNABLE TO ADJUST RETURN INLETS
OR FOR POOLS WITHOUT RETURN
INLET DIRECTIONAL FITTINGS
Use Zodiac universal return
line diverter (Part #W24100).
Pinch wires together and
insert fully into return inlet.
Note: If the return inlets cannot be pointed downward, then you MUST install Zodiac return line diverters.
Please call Zodiac for a dealer near you.
Female End
Wheel Deflector