Filter
Top Products
EN - 19
Discharge Chute Crank
(921023, 024, 030, 032, 035)
(Figure 20)
IMPORTANT: If chute does not stay in set
position, adjust as directed in SERVICE AND
ADJUSTMENTS on page 27, or repair before
operation.
Rotate the Chute with Discharge Chute
Crank.
IMPORTANT: DO NOT force frozen chute
controls. If frozen, take to warm place until
controls are free.
Quick-Turn Chute Control
(921028, 029)
(Figure 21)
IMPORTANT: If chute does not stay in set
position, adjust as directed in Discharge
Chute (921028, 029) on page 28, or repair
before operation.
Rotate discharge chute with Quick-Turn
Chute Control (Figure 21).
IMPORTANT: DO NOT force frozen chute
controls. If frozen, take to warm place until
controls are free.
Axle Lock Pin (921024)
(Figure 22)
Use the axle lock pin to lock or unlock the
right or left wheel. Lock both wheels to
increase traction; unlock one wheel to allow
for easier turning of the unit.
NOTICE: Unit will not drive with both wheels
unlocked.
Heated Handles
(921028, 029)
Turn the heated handles
switch to the ON (1)
position to activate. Turn
the switch to the OFF (2)
position to deactivate.
Scraper Blade
The scraper blade allows better contact with
the surface being cleared. It also prevents
damage to the housing from normal usage.
IMPORTANT: DO NOT allow Scraper Blade
to wear too far or Auger/Impeller housing will
become damaged.
Figure 20
OS7106
Figure 21
OS7105
Figure 22
Wheel Unlocked
Wheel Locked
Axle Lock
Pin
OS6000
OS1950
1
2