Filter
Top Products
GB - 5
1. WARNING!
2. DANGER!
3. DANGER!
EMISSION CONTROL SYSTEM
This equipment and/or its engine may include
exhaust and evaporative emissions control
system components required to meet U.S.
Environmental Protection Agency (EPA)
and/or California Air Resources Board
(CARB) regulations. Tampering with
emission controls and components by
unauthorized personnel may result in severe
fines or penalties. Emission controls and
components can only be adjusted by an
Ariens Company dealer or an authorized
engine manufacturer's service center.
Contact your Ariens Company Equipment
Retailer concerning emission controls and
component questions.
SAFETY RULES
Read, understand, and follow all safety
practices in Owner/Operator Manual before
beginning assembly or operating. Failure to
follow instructions could result in personal
injury and/or damage to unit.
Read Owner/Operator Manual.
Keep people away from unit
while operating. Keep children
out of work area and under
watchful care of a responsible
adult.
Never direct discharge towards
persons or property that may be
injured or damaged by thrown
objects.
Stop engine, remove key, read
manual before making any
repairs or adjustments.
Wear appropriate hearing
protection.
ONLY use clean-out tool to
clear blockages. NEVER use
your hands.
08000206
08000206
Figure 2
1
2
3
OL1801
OL4370
OL0910
OL4010
OL4690
ROTATING PARTS! ONLY use
clean-out tool to clear
blockages. NEVER use your
hands. High speed impeller
rotates below discharge
opening. Wait for all moving
parts to stop before removing
clogs or servicing.
ROTATING PARTS.
Keep clear of auger while
engine is running.
• Read Operator’s Manual.
• Allow operation only by
properly trained adult,
never children.
• Stop engine and remove
ignition key prior to
leaving the operator’s
position for any reason.
• Keep all controls, guards
and safety devices
properly serviced and
functional.
• Never direct discharge
towards persons or
property that may be
injured or damaged by
thrown objects.
OS6610
OS2080