Filter
Top Products
GB - 6
4.DANGER! TO AVOID SERIOUS
INJURY OR DEATH
5.WARNING!
6.DANGER!
7.HOT SURFACES!
EMISSION CONTROL SYSTEM
This equipment and/or its engine may include
exhaust and evaporative emissions control
system components required to meet U.S.
Environmental Protection Agency (EPA)
and/or California Air Resources Board
(CARB) regulations. Tampering with
emission controls and components by
unauthorized personnel may result in severe
fines or penalties. Emission controls and
components can only be adjusted by an
Ariens Company dealer or an authorized
engine manufacturer's service center.
Contact your Ariens Company Equipment
Retailer concerning emission controls and
component questions.
SAFETY RULES
If unit is to be used by someone other than
original purchaser; loaned, rented or sold,
ALWAYS provide this manual and any
needed safety training before operation.
Only the user can prevent and is responsible
for accidents or injuries occurring to
themselves, other people or property.
Read the operator’s manual.
Keep children and others away
from unit while operating.
Never direct discharge toward
other people. Thrown objects
can cause injury.
Look down and behind before
and while backing.
Never carry children.
Go up and down slopes, not
across.
DO NOT operate on slopes
over 10°.
• If machine stops going uphill, stop
blade and back down slowly.
• Avoid sudden turns.
• Keep safety devices (guards,
shields, switches, etc.) in place and
working.
• Check interlock system per manual
before use.
• Understand location and function of
all controls.
• Never allow operation by untrained
persons.
• Disengage PTO, stop unit and
engine, set parking brake and
remove key before making any
inspections, repairs, etc.
OL1801
OL1802
OL1803
OL1804
OL1805
MAX
10
OL1807
Always stand clear of discharge
area.
Do not operate mower unless
bagger is attached or guards
are in operating position.
Keep hands and feet away.
Do not operate mower unless
guards are in operating position
or bagger is attached.
DO NOT touch parts which are
hot from operation. ALWAYS
allow parts to cool.
OL1814
OL1815
OL1801