Filter
Top Products
GB - 17
TIPPING SEAT FORWARD
Remove clamping knob (915065, 067, 055,
057, 059) or flat washer and nut (915501,
502) and tip seat forward to access the
battery and engine.
NOTE: Models 915501 and 502 must use the
flat washer and nut to secure the seat to the
unit.
Tip seat back and secure to unit with
clamping knob (915065, 067, 055, 057, 059)
or flat washer and nut (915501, 502)
(figure 9).
25 Hours
or Every
Season
Check
Battery
Keep battery and battery terminals clean (see Cleaning Battery
and Battery Cables on page 22).
Lubricate
Unit
Apply grease to zerk (1) on
each front wheel
50 Hours
or Every
Season
Check
Fasteners
Check mower blade mounting hardware and all other fasteners.
Replace fasteners that are missing or damaged. Tighten all nuts
and bolts to the correct torque value.
100 Hours
or Every
Season
Check All
Belts
Replace worn or deteriorated belts.
• Check hydrostatic belt (see REPLACING HYDROSTATIC
BELT on page 25 for hydrostatic belt location).
• Check PTO belt (see REPLACING PTO BELT on page 24
for PTO belt location).
Interval Task Action
1
SERVICE AND ADJUSTMENTS
WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
OE0300
Figure 9
1
2
1. Clamping Knob (915065, 067, 055,
057, 059) or flat washer and nut
(915501, 502)
2. Seat Tipped Forward